DGK Pellachrom | decorative and marine paints | - Header Section

X

DGK Pellachrom | decorative and marine paints | - Main Section

DGK Pellachrom | decorative and marine paints | - Main Component

water
WATERBASED
  • 750 ml
  • 3 L
  • 10 L

DECONYL MATT

Header

premium emulsion paint

DECONYL MATT is a premium emulsion paint. Suitable for plaster, gypsum board, concrete, brick, wood etc. after careful surface preparation. Creates a particularly flexible film. This easy-to-use paint offers great hiding power and ensures high resistance to adverse weather conditions. Comes in excelling ultra pure white and in vivid, long lasting, non yellowing shades. This low sheen paint covers imperfections on walls efficiently offering a high quality uniform finish. Extremely resistant to frequent washing with detergents. Easy to apply, anti-splatter paint. Being ammonia-free, this paint is practically odourless.

  • excellent washability performance
  • high coverage & ultimate hiding power
  • sublime premium finish
1
BUILDINGS – INTERIOR USE
matt
Finish
toolsall
TOOLS
DECONYL MATT
THINNING
1-2 hr
DRYING TIME
2-4 hrs
OVERCOATING INTERVAL
1- 2
RECOMMENDED COATS
12 sin plin 2
m2/L
SPREADING RATES
colortouch TINTING

Preparation

Carefully prepare surface to obtain good results. Surface must be clean, dry and free from loose or flaking material, dust, oils and salting.

► Surfaces on sound condition:
Apply 2 coats of DECONYL MATT.


► New plaster, concrete, brick, cement:
• Prime with FERM (H2O) or Α-500 PRIMER. Apply 1 or 2 coats of DECONYL MATT.
• Prime with AQUAFERM. Apply 1-2 coats of DECONYL MATT.


► New gypsum board or putty:
• Prime with FERM (H2O) or Α-500 PRIMER. Apply 2 coats of DECONYL MATT.
• Prime with AQUAFERM. Apply 1-2 coats of DECONYL MATT.


► Old water-based or lime paints:
Prime with FERM (H2O) thinned up to 50% with water. Apply 2 coats of DECONYL MATT.

Use

Roller, brush or spray airless. Thin by 5-15% with water.

►  Stir well before use and during application.

► Allow newly poured concrete to cure for 30 days, then prime with FERM (H2O) before painting with DECONYL MATT.

Drying out - coverage

Drying times are dependent on ambient temperature and film thickness.

Touch dry: 1-2 hours.

Recoat: 2-4 hours.

Practical coverage: 10-14m²/lt depending on the thickness of each coat and the surface porosity.

Download PDF Technical Data Sheet - DECONYL MATT | Premium emulsion paint

DGK Pellachrom | decorative and marine paints | - Bottom info

Calculate the quantity of the paint

you need for

Your Home

Your Boat